Spectrophotometric resolution of ternary mixtures of pseudoephedrine hydrochloride, dextromethorphan hydrobromide, and sodium benzoate in syrups using wavelength selection by net analyte signals calculated with hybrid linear analysis

Hybrid linear analysis (HLA), as a recent factor-based multivariate calibration technique, was applied for the spectrophotometric determination of ternary mixtures of pseudoephedrine hydrochloride (PSU), dextromethorphan hydrobromide (DXT), and sodium benzoate (BNZ). The utilized HLA was assisted by a wavelength selection procedure which was based on the calculation of the net analyte signal (NAS) regression plot in any considered wavelengths window for each test sample, in addition to a moving window strategy for searching the region with maximum linearity of NAS regression plot (minimum error indicator (EI)). HLA was applied because it was simpler to adapt to the NAS regression plot methodology, and also used less factors than partial least squares (PLS). An orthogonal array design was applied for formation of calibration and prediction sets in the concentration ranges 0-7500 μmol L⁻¹ for PSU, 0-300 μmol L⁻¹ for DXT, and 0-1400 μmol L⁻¹ for BNZ. The method had the ability to select wavelength regions that minimize the effect of non-linearity of the spectral data, in addition to that of non-modeled interferences. The application of the selected wavelength regions improved the obtained relative standard error of predictions for PSU, DXT, and BNZ, respectively, from 5.24, 8.67, and 5.48% to 2.19, 5.21, and 3.62% (using lower number of factors). To check the ability of the proposed method in selection of linear regions of spectra, a test for detecting non-linear regions of spectral data in multivariate spectroscopic assays was also described. Additives in the commercial syrup samples did not interfere with their determinations. The method was successfully applied for the determination of pseudoephedrine HCl, dextromethorphan HBr, and sodium benzoate in cough suppressant syrup samples.     

Infrared-visible sum frequency generation spectroscopic study of molecular orientation at polystyrene/comb-polymer interfaces

Surface-sensitive infrared-visible sum frequency generation spectroscopy (SFG) in total internal reflection geometry has been used to study the structure of poly(vinyl n-octadecyl carbamate-co-vinyl acetate) (PVNODC) or poly(octadecyl acrylate) (PA-18) in contact with a deuterated or hydrogenated polystyrene (dPS or hPS) layer. SFG spectra from the PVNODC (or PA-18)/hPS interface show methyl and methylene peaks corresponding to PVNODC (or PA-18) and phenyl peaks corresponding to the PS. Analysis suggests that the methyl groups are tilted at angles less than 30 degrees with respect to the surface normal. The presence of a strong methylene peak suggests the PVNODC alkyl side chains contain more gauche defects at the PS/PVNODC interface in comparison to PVNODC (or PA-18)/air interfaces. On heating, the SFG intensity from the PS/PA-18 interface drops sharply near the bulk melting temperature (T(m)) of PA-18. Interestingly, a similar drop in SFG signal is also observed for the PS phenyl groups. This demonstrates the ability of the phenyl group at the PS/PA-18 interface to rearrange itself upon the solid-to-liquid transition of the PA-18 alkyl side chain, at a temperature well below the bulk PS glass transition temperature. For PS/PVNODC interfaces, the drop in SFG intensity is gradual and in agreement with the three broad transitions of PVNODC observed in the bulk.     

An accurate expression for radial distribution function of the Lennard-Jones fluid

A simple and accurate expression for radial distribution function (RDF) of the Lennard-Jones fluid is presented. The expression explicitly states the RDF as a continuous function of reduced interparticle distance, temperature, and density. It satisfies the limiting conditions of zero density and infinite distance imposed by statistical thermodynamics. The distance dependence of this expression is expressed by an equation which contains 11 adjustable parameters. These parameters are fitted to 353 RDF data, obtained by molecular dynamics calculations, and then expressed as functions of reduced distance, temperature and density. This expression, having a total of 65 constants, reproduces the RDF data with an average root-mean-squared deviation of 0.0152 for the range of state variables of 0.5  T^*  5.1 and 0.35  ρ^*  1.1 (T^*=kT/ε and ρ^* = ρσ³ are reduced temperature and density, respectively). The expression predicts the pressure and the internal energy of the Lennard-Jones fluid with an uncertainty that is comparable to that obtained directly from the molecular dynamics simulations.     

Role of axial ligand on the electronic structures of active intermediates in cytochrome P-450, peroxidase and catalase

DFT method (B3LYP) with 6-31G^* basis set was utilized in the computation of a fully optimized structure, net atomic charges and spin densities of the intermediate of cytochrome P-450-oxoiron(IV) porphyrin cation radical, compound I – in the presence of axial ligand such as thiolate (SMe⁻) imidazole (IM), phenoxide (OPh⁻), methoxide (OMe⁻) and chloride (Cl⁻). The results show doublet states in compound I are about 2–4 kcal/mol more stable than quartet states for all aforementioned ligands, and the doublet state is the ground state in all cases. However, electron donor ability of the ligands are in the order of SMe⁻ > IM > OMe⁻ > OPh⁻ > Cl⁻. Also the active oxidant intermediate of cytochrome P-450 between different mesomeric structures select sulfur oxygen radical type structure and can be viewed as (RS^↓)Fe^↑(IV)(O^↑)(Por). In horseraddish peroxidase (HRP) and peroxidase with histidine axial ligand π cation radical character of porphyrin ring is preferred (Im)Fe^↑(IV)(O^↑)(Por^↓). For the ligands such as OMe⁻, OPh⁻ and Cl⁻ oxidation mainly took place on the iron and the active intermediate can be viewed as (L)Fe^↑(V)(O)(Por) with one unpaired electron localized on the iron.     

Effect of using mixed ion-pairs on PVC-membrane electrodes for ephedrine

Mixed ion-pairs based on the use of ephedrinium (EPH)-TPB plus EPH-reineckate (II) and phenylephrine-TPB plus EPH-reineckate (III) were tried for use in plastic membranes. The results were compared to those of an EPH-reineckate (I) single ion-pair electrode. The Nernstian slopes were 50, 49 and 55 mV decade^–1 for membranes I, II and III, respectively. The linear concentration ranges were 10^–5–10^–1, 4.0 × 10^–5–10^–1 and 6.3 ×^–5–10^–1 M ephedrine. The detection limits were 4 ×^–6,10^–5 and 1.2 × 10^–5 M ephedrine for membranes I, II and III, respectively. The pH ranges were 4–9, 3–9 and 2–8 for I, II and III-membranes, respectively. Selectivity coefficient values for membrane II were better than those for membranes I and III. The effects of increasing KC1 concentration and temperature changes were explained for the three electrodes. The isothermal temperature coefficients were 0.00145, 0.0007 and 0.00055 V/ °C for electrodes I, II and III. Electrode III was applied for the determination of ephedrine in its pharmeaceutical preparations with an overall relative standard deviation range of 1.3–2.4% and an overall mean recovery value of 98.1%.     

The dangers of using KBr,KI and CaI2 as mulling agents during the preparation of infrared discs of complexes

Tribochemical reactions of KBr, KI and CaI₂ with [Cu(L)Cl₂(EtOH)_3/2(H₂O)]1/2H₂O (L = formylhydrazine) give novel Cu^I and Cu^II complexes, which have been characterized by elemental analyses, spectral (i.r., u.v.–vis., ¹H-n.m.r.) and magnetic measurements. The i.r. spectra indicate that (L) behaves in a monodentate manner, coordinating via the azomethine nitrogen (C-N) group in the Cu^II complexes, but behaving as a bidentate ligand, via the carbonyl oxygen and NH₂ groups in the Cu^I complexes. KI and CaI₂ react with [Cu(L)Cl₂(EtOH)_3/2(H₂O)]-1/2H₂O in the solid state, accompanied by a colour change, substitution of the chloride by iodide ions, and reduction of Cu^II to Cu^I to give complexes with formulae [Cu(L)I(EtOH)_1/2] and [Cu_1.7(L)I_1.7(EtOH)_1/2]. On the other hand, the tribochemical reaction of KBr with [Cu(L)Cl₂(EtOH)_3/2(H₂O)]1/2H₂O is accompanied by a colour change; substitution of the chloride by bromide ions, but without reduction of Cu^II and yields a complex of formula [Cu(L)₂Br₂(EtOH)(H₂O)]1/2EtOH. The spectral and magnetic results suggest a distorted octahedral geometry for the Cu^II complexes while a tetrahedral geometry around the Cu^I ion. The non-stoichiometric structure of [Cu_1.7(L)I_1.7(EtOH)_1/2] is discussed.     

Reaction of N,N-diarylamidines with 3,4,5,6-tetrachloro-1,2-benzoquinone

A synthesis of 5,11b-dihydro-1H-dibenzo[d,f][1,3]diazepin-1-ones was found in the reaction of nitro-substituted N¹,N²-diarylamidines with 3,4,5,6-tetrachloro-1,2-benzoquinone. In contrast, 6,7,8,9-tetrachlorodibenzodioxins were obtained from reaction of N¹,N²-diphenylpropionamidine and N¹,N²-di-(4-tert-butylphenyl)acetamidine with 3,4,5,6-tetrachloro-1,2-benzoquinone.     

Determination of phenols in water samples by single-drop microextraction followed by in-syringe derivatization and gas chromatography-mass spectrometric detection

Trace analysis of phenolic compounds in water was performed by coupling single-drop microextraction (SDME) with in-syringe derivatization of the analytes and GC-MS analysis. The analytes were extracted from a 3ml sample solution using 2.5microl of hexyl acetate. After extraction, derivatization was carried out in syringe barrel using 0.5microl of N,O-bis(trimethylsilyl)acetamide. The influence of derivatizing reagent volume, derivatization time and temperature on the yield of the in-syringe silylation was investigated. Derivatization reaction is completed in 5min at 50 degrees C. Experimental SDME parameters, such as selection of organic solvent, sample pH, addition of salt, extraction time and temperature of extraction were studied. Analytical parameters, such as enrichment factor, precision, linearity and detection limits were also determined. The limits of detection were in the range of 4-61ng/l (S/N=3). The relative standard deviations obtained were between 4.8 and 12% (n=5).     

One‐pot synthesis of 1‐ and 5‐substituted 1H‐tetrazoles using 1,4‐dihydroxyanthraquinone–copper(II) supported on superparamagnetic Fe3O4@SiO2 magnetic porous nanospheres as a recyclable catalyst

An effective one‐pot, convenient process for the synthesis of 1‐ and 5‐substituted 1H‐tetrazoles from nitriles and amines is described using1,4‐dihydroxyanthraquinone–copper(II) supported on Fe₃O₄@SiO₂ magnetic porous nanospheres as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields. The preparation of the magnetic nanocatalyst with core–shell structure is presented by using nano‐Fe₃O₄ as the core, tetraethoxysilane as the silica source and poly(vinyl alcohol) as the surfactant, and then Fe₃O₄@SiO₂ was coated with 1,4‐dihydroxyanthraquinone–copper(II) nanoparticles. The new catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometry, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherm analysis and inductively coupled plasma analysis. This new procedure offers several advantages such as short reaction times, excellent yields, operational simplicity, practicability and applicability to various substrates and absence of any tedious workup or purification. In addition, the excellent catalytic performance, thermal stability and separation of the catalyst make it a good heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles as a novel recyclable catalyst for N‐arylation of nitrogen heterocycles and green synthesis of 5‐substituted 1H‐tetrazoles

In this study, dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe₃O₄@SiO₂ nanoparticles were prepared via a multistep‐synthesis. Then, the synthesized composite was fully characterized by various techniques such as fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), dynamic light scattering (DLS), UV‐vis spectroscopy, energy dispersive X‐ray analysis (EDX), thermogravimetric analysis (TGA) and vibration sample magnetometer (VSM). From the information gained by FE‐SEM and TEM studies it can be inferred that the particles are mostly spherical in shape and have an average size of 50 nm. Also, the amount of Cu is determined to be 0.51 mmol/g in the catalyst by inductively coupled plasma (ICP) analyzer. This magnetic nano‐compound has been successfully applied as a highly efficient, magnetically recoverable and stable catalyst for N‐arylation of nitrogen heterocycles with aryl halides (I, Br) and arylboronic acids without using external ligands or additives. The catalyst was also employed in a one‐pot, three‐component reaction for the efficient and green synthesis of 5‐substituted 1H‐tetrazoles using various aldehydes, hydroxylamine hydrochloride and sodium azide in water. The magnetic catalyst can be easily separated by an external magnet bar and is recycled seven times without significant loss of its activity.